The research of sawn wood is developing far more rapidly than following it technique and technology. The newest achievements in technique, technologies and industrial computerization are forcing once again to …
Several approaches have been taken to compare modulus of elasticity MOE and resulting modulus of rupture MOR determined using different testing principles and methods. Those included two approaches of long …
In order to determine changes of strength characteristics in glued laminated timber a research was made with flat and edge glued specimens and by changing their length. Pine timber specimens …
Understanding and modeling links and relations between wood micro-scale characteristics and behavior of real timber elements requires scaling-up sizes of specimens as well as testing methods and instrumentation corresponding to …
In order to determine dynamic modulus of elasticity and strength classification of Lithuanian grown Scots pine, comparative a research was made using two non- destructive devices: “Timber Grader MTG” and …
This article presents the research results, showing, how the surface roughness of the wood processed by milling is changing with increase of the cutting path of milling tool. The tests …
The main aim of research was to investigate spatial physical and mechanical properties in over-matured (more than 300 years) pine tree stem. Research completed using two concepts. In the first …
This article presents the research results showing wood surface roughness changing when milling with variable cutting path of milling tool, feed and cutting speed. The tests performed with the wood …
This paper discuss first phase of a project focused on performance and indications of possible enhanced mechanical properties for the treated compared with untreated Lithuanian-grown oak wood. The aim of …
This paper presents the research results, showing how the surface roughness of pine (Pinus sylvestris L.) wood is changing with increase of sanding time and abrasive grit size. The samples …
This paper discusses a project focused on performance and indications of possible enhanced mechanical properties for the treated with ammonia compared with untreated Lithuanian-grown oak wood. The aim of the …
The in-situ assessment of timber structures has gained considerable attention in recent years due to some unexpected failures of public buildings. The assessment of timber, however, has been used in …
This article describes variations of fractional composition and moisture content of wood chips from forest residues – tops and branches – and 1.2 m long firewood. After chipping with the …
The main aim of the research was to investigate the influence of number and size of scattered knots and knot clusters on wooden board modulus of elasticity (MOE). More than …
This paper presents the research results, showing how the surface roughness of black alder (Alnus glutinosa L.) and larch (Larix sibirica L.) wood is changing with increase of sanding time …
