The application of plastic parts on the wood surface can be done by injection molding process or additive technique. While in injection moulding the plastic melt is applied pressurized, the use of the fused deposition moulding technique (FDM) only offers the application through melt viscosity and gravity. Characterising the bonding mechanism and its strength by varying the filament type in FDM is the goal of the investigations.
Keywords: wood veneer, plastic, adhesion, fused deposition modelling
Authors
Vicky Reichel
Technical University Braunschweig, Germany
Peer Hach
Technical University Braunschweig, Germany
Lisa Evertz
Technical University Braunschweig, Germany
Julien Mayer
Technical University Braunschweig, Germany
Jana Heublein
Technical University Braunschweig, Germany
Karolin Diede
Technical University Braunschweig, Germany
Niklas Günther
Technical University Braunschweig, Germany
Siegfried Weiß
Technical University Braunschweig, Germany
Login to download the PDF